CCTV | Time Attendance | EPABX | Video Door Phone | Fire Alarm | PA | Automation | Networking | Software - Surat | Ahmedabad
Email: bhavin.techmax@gmail.com

stqc uidai biometric deviceTechMa Solution
G+ FB

DGET UIDAI Based STQC Certified Biometric Time Attendance System with Support of Camera, Biometric IRIS Scanner, Fingerprint Scanner For Time Attendance.

CLICK HERE TO DOWNLOAD Brochure
CLICK HERE TO DOWNLOAD Product Technical Detail

TechMax Solution provide DGET UIDAI Based STQC Certified Biometric Time Attendance Systems for VTPs, KVKs, ITIs, GKS, ITC and other Institutes.
TechMax Solution provide complete solution for stqc certified biometric device for various purposes like Enrollement of data, Time Attendance For Training Center and Institutes.

We supply and Installation of STQC Certified Biometric Devices across Pan India.

Contact: Mr. Bhavin Ahir  Mobile: +91-9898430643 Email: bhavin.techmax@gmail.com
 

DGET UIDAI Based STQC Certified Biometric Time Attendance System
STQC Certified Biometric Devices For Training Centres,
ITIs (Industrial Training Centres),
VTPs (Vocational Training Provides),
VTCs (Vocational Training Centres),
GKS Centres (Gujarat Knowledge Society),
And Other Government Offices As Per DGET/MES Scheme.

 
Vivekanand Biometric Time Attendance System By TechMax Solution
(Dedicate To Shri. Swami Vivekanand On Their 150th Birth Anniversary)
 
Specifications:
Hardware Specification   
S.No Component Specification Compliance (Yes/No) Clarification (If Any)
1 Biometric Sensor and Extractor  All the parameters of Biometric Devices for Authentication should be as per latest STQC scheme for certification of UIDAI biometric Devices (Authentication). STQC certified sensor and extractor only.  Yes (STQC Certified) Yes STQC Certified
2 Processor 32- bit, ARM-9/x86 equivalent of higher, 400 MHz of higher frequency  Yes Quad-core 1.3 GHz Cortex-A7
3 Memory RAM 128 of higher, FLASH 256 MB or higher  Yes 1 GB RAM
Memory capacity to store fingerprints >0 3000  Fingerprint Store: 5000
Memory capacity to store transaction logs >=100000  Transaction Logs: 100000
Memory capacity to store device operation logs>=100000  Operational Logs: 100000
4 Add on Memory Micro SD Slot minimum 4 GB or more  Yes Internal-8GB / External-microSD, up to 32 GB
5 Keypad Minimum 16 key alpha numeric keypad with navigation  Yes Touch Keypad
keys, key size to be large enough for navigation, or on   
screen key pad of Qwerty keypad.   
6 OS/ Software Following OS with GUI Support, JVM or equivalent support  Yes (Android) Android
& SDK for 3rd party application development   
i. Linux 2.6 or higher   
ii. Windows   
iii. Android   
iv. Any other equivalent OS   
7 Ports USB 2.0 or higher -1 or more nose, RJ 45 (Ethernet)/ wifi  Yes microUSB v2.0
8 Language Support Unicode support for all Indian language including English  Yes  
9 Status indications Multi colour LED’s / LCD (to indicate network connection,  Yes Capacitive touchscreen, 16M colors
signal strength to indicate battery charge remaining etc) or  600 x 1024 pixels, 7.0 inches
on screen display to all indicator like battery charger network strength etc.  MultiTouch
10 Other indicators Audio/ visual capability, A/V indication either at device  Yes LoudSpeaker
level or at application level for   
Indication various events like   
a) Indicating for placing finger   
b) Start of capturing   
c) End or capturing   
11 Connectivity Two channels or connectivity are mandatory for devices,  Yes GPRS + Wifi
first connectivity as GPRS is mandatory. Second   
connectivity can be through wifi b/g/n/ fixed broadband   
e.g. GPRS + broadband, GPRS + wifi etc   
12 Non – volatile storage Must be capable of storing audit trails of at least 1000 transactions Yes Internal 8GB Memory
13 Display  Minimum 3.5” screen or higher, with at least 262k colors TFT  Yes 7Inch, Capacitive touchscreen, 16M colors
14 Battery backup  Minimum 4 hours battery backup  Yes  Li-Ion 3500 mAh battery
15 Antenna  Internal, External / Extended External Antenna  Yes Internal
16 Power adaptor  AC/ DC adaptor with surge protection, input 100 -264v AC, 50Hz  Yes  
17 Environment Storage not including battery 0’C to 55’ c  Yes  
Operating temp 0’ C to 50 ‘C  
18 Humidity  10-90 % RH Non-condensing  Yes  
19 Speaker A facility should be provided for voice confirmation of the transaction, 1W or more  Yes  
20 Other Accessories Durable carry case, multilingual user manual (English, Hindi) screwdriver, damper a white cloth (45 cm * 45 CM)  Yes  
21 Other features External accessible slots for SIM and SD Cards  Yes Sim + SD Card
22 Support Complete cover support with breakage replacement for a period of three years.  Ok  Please Read Terms & Condition In Quotation
23 Security 2048 –bit, PKI 256 – bit AES, Base 64, SHA- 256 (optional)  Yes Provided This Security On Server Setting
24 GPS Industry standard 16 channel NMEA compliant GPS Support Yes YES
25 Environment health and safety RoHS certification (optional)  NO (Optional) This Is Optional, So Its Not Availble Right Now 
26 EMC compliance FCC class A or equivalent (optional)  NO (Optional) This Is Optional, So Its Not Availble Right Now 
27 Ingress Protection (IP) Compliance  Dust resistant, Water resistance (optional)
NO (Optional) This Is Optional, So Its Not Availble Right Now 
Client Application Specification   
S.No Component Specification Compliance (Yes/No) Clarification (If Any)
1 NFIQ Quality Software Inbuilt NFIQ quality software either at device level or extractor level to check the quality of fingerprint during enrolment  Yes  
2 Enrolment client Enrolment client application shall have the following functionalities  Yes  
· Enrolment of 10 fingerprints with identifier (Unique registration number)   
· Verification of NFIQ before accepting fingerprint for enrolment   
· De-duplication of fingerprint during enrolment for single candidate   
         
3 Authentication on client Authentication client application shall have following functionalities.  Yes  
· Authentication of fingerprint based on 1: n logic among the local storage of fingerprint templates   
· Attendance transaction logs to be stored internally   
· Voice enablement of authentication output in English and Hindi   
4 Integration Biometric fingerprint enrollment and authentication client application should be integrated with office server application and should be able to upload / download through SSL / https connection dully suiting the API / web services provided by office Yes  
5 Remote update of software Device must support version control feature in order to remotely monitor and provision application and system software, remote device management. Feature must be provisioned as a part of the device deployment Yes  
6 Reports The following reports should be generated at the device level
1. Daily attendance report (batch wise and training center wise)
2. Batch wise attendance report
3. Student Wise attendance report
4. Trainers wise attendance report
5. Enrolment reports (displaying date of enrolment, number of fingerprint, etc)
6. Consolidated training centre attendance report
More reports may be added in the future.
Yes  
7 Additional features • Device operation logs should be captured and stored internally. Device operations like, switch on & off, enrollment of finger print & user, change of settings, etc, shall be logged.
• Date and time in the biometric device should be either of the GPRS connection or server timings. No option to change the data and time should be available in the biometric device.
• Deletion of individual record (enrolment, attendance transaction logs, device operation logs should be disabled
Yes  
8 Output file format Biometric data to be transferred to central server should be in XML format Yes  
 

STQC Certified UIDAI Biometric Devices (BDCS-08-03)

STQC Certified UIDAI Biometric Fingerprint Scanner

stqc-certified-uidai-biometric-fingerprint-scanner

Capture mode: Plain live scan capture
Image Acquisition Requirements: Setting level 31 or higher (Section 9.1 of Biometric Design Standards for UID Applications V1.0)
Image evaluation frame rate: > 3 frames/sec, continuous image capture
Capture mode: Auto capture with built-in quality check (incorporates NIST quality considerations)
Capture area: > 76mm x 80mm
Connectivity: USB 2, USB-IF certified
Power: Through USB
Dimension (W X H X D): < 160mm x 160mm x 160mm
Weight: Maximum 2.5 Kg.
Operating temperature: 0 – 50 C
Humidity: 10 – 90% non-condensing
Durability/Shock: IP 54
Standards: UL certified (if applicable). Meets ISO 19794-4:2005 Section 7 and Annex A certification requirements (IAFIS Appendix F certified).
Software API: Compliant with UIDAI Device Capture API specification V1.0 RC 3

STQC Certified UIDAI Biometric IRIS Recognition Scanner

stqc-certified-uidai-biometric-iris-recognition-scanner
Device Characteristics Stationary (mounted: wall, tripod or stand) Hand-held Hand-held with alignment aid
Iris Diameter (In pixel) > 210
Spatial Resolution Pixel Resolution > 60% @ 4.0 Lp/mm
> 16 Pixels/mm
# of simultaneous captured eyes  2
Viewfinder External Internal External OR Internal
Capture distance > 750 mm > 50 mm > 20 mm
Capture volume (width/height/depth) > 250x500x500mm > 20x15x12mm > 20x15x12mm
Exposure time < 15ms < 33 ms < 33 ms
Imaging wavelength 700-900 nm
Spectral Spread Power in any 100nm band > 35% of total power
Scan type Progressive
Image margins Left & right: 0.50x iris diameter,
Top & bottom: 0.25x iris diameter
Pixel depth > 8 bits/pixel
Image evaluation frame rate > 5 frames/sec, continuous image capture
Capture mode Auto capture with built-in quality check (incorporates NIST quality considerations)
Sensor signal to noise ratio > 36 DB
Connectivity USB 2, USB-IF certified Or Networked (TCP/IP) USB 2, USB-IF certified
Power USB or independent PS
Weight NA < 1Kg <1 Kg
Dimension <300x100x300mm < 220x200x100mm < 220x200x100mm
Operating temperature 0-49C
Humidity 10 – 90% non-condensing
Durability/Shock IP54
Safety Standard Exempt Group per IEC 62471:2006-07
Standards FCC Class A, RoHS
Software API Compliant with UIDAI Device Capture API specification V1.0 RC 3

STQC Certified UIDAI Biometric SLAP Fingerprint Scanner 4+4+2

stqc-certified-uidai-biometric-slap-4+4+2 fingerprint-scanner

Capture mode: Plain live scan capture
Image Acquisition Requirements: Setting level 31 or higher (Section 9.1 of Biometric Design Standards for UID Applications V1.0)
Image evaluation frame rate: > 3 frames/sec, continuous image capture
Capture mode: Auto capture with built-in quality check (incorporates NIST quality considerations)
Capture area: > 76mm x 80mm
Connectivity: USB 2, USB-IF certified
Power: Through USB
Dimension (W X H X D): < 160mm x 160mm x 160mm
Weight: Maximum 2.5 Kg.
Operating temperature: 0 – 50 C
Humidity: 10 – 90% non-condensing
Durability/Shock: IP 54
Standards: UL certified (if applicable). Meets ISO 19794-4:2005 Section 7 and Annex A certification requirements (IAFIS Appendix F certified).
Software API: Compliant with UIDAI Device Capture API specification V1.0 RC 3

STQC Certified UIDAI Biometric Attendance System For School, College, Training Programme Centre and Other Institutes

stqc-certified-uidai-biometric-time-attendance-system
This system specially used to take time attendance at all Vocational Training Providers (VTPs) under SDIS scheme for each training center.
We Provide Complete installation of this system.
We Provide following Compliance for This System.
Hardware Specification 
S.No Component Specification Compliance (Yes/No)
1 Biometric Sensor and Extractor  All the parameters of Biometric Devices for Authentication should be as per latest STQC scheme for certification of UIDAI biometric Devices (Authentication). STQC certified sensor and extractor only.  Yes (STQC Certified)
2 Processor 32- bit, ARM-9/x86 equivalent of higher, 400 MHz of higher frequency  Yes
3 Memory RAM 128 of higher, FLASH 256 MB or higher  Yes
Memory capacity to store fingerprints >0 3000 
Memory capacity to store transaction logs >=100000 
Memory capacity to store device operation logs>=100000 
4 Add on Memory Micro SD Slot minimum 4 GB or more  Yes
5 Keypad Minimum 16 key alpha numeric keypad with navigation  Yes
keys, key size to be large enough for navigation, or on 
screen key pad of Qwerty keypad. 
6 OS/ Software Following OS with GUI Support, JVM or equivalent support  Yes (Android)
& SDK for 3rd party application development 
i. Linux 2.6 or higher 
ii. Windows 
iii. Android 
iv. Any other equivalent OS 
7 Ports USB 2.0 or higher -1 or more nose, RJ 45 (Ethernet)/ wifi  Yes
8 Language Support Unicode support for all Indian language including English  Yes
9 Status indications Multi colour LED’s / LCD (to indicate network connection,  Yes
signal strength to indicate battery charge remaining etc) or 
on screen display to all indicator like battery charger network strength etc. 
10 Other indicators Audio/ visual capability, A/V indication either at device  Yes
level or at application level for 
Indication various events like 
a) Indicating for placing finger 
b) Start of capturing 
c) End or capturing 
11 Connectivity Two channels or connectivity are mandatory for devices,  Yes
first connectivity as GPRS is mandatory. Second 
connectivity can be through wifi b/g/n/ fixed broadband 
e.g. GPRS + broadband, GPRS + wifi etc 
12 Non – volatile storage Must be capable of storing audit trails of at least 1000 transactions Yes
13 Display  Minimum 3.5” screen or higher, with at least 262k colors TFT  Yes
14 Battery backup  Minimum 4 hours battery backup  Yes
15 Antenna  Internal, External / Extended External Antenna  Yes
16 Power adaptor  AC/ DC adaptor with surge protection, input 100 -264v AC, 50Hz  Yes
17 Environment Storage not including battery 0’C to 55’ c  Yes
Operating temp 0’ C to 50 ‘C
18 Humidity  10-90 % RH Non-condensing  Yes
19 Speaker A facility should be provided for voice confirmation of the transaction, 1W or more  Yes
20 Other Accessories Durable carry case, multilingual user manual (English, Hindi) screwdriver, damper a white cloth (45 cm * 45 CM)  Ok 
21 Other features External accessible slots for SIM and SD Cards  Yes
22 Support Complete cover support with breakage replacement for a period of three years.  Ok 
23 Security 2048 –bit, PKI 256 – bit AES, Base 64, SHA- 256 (optional)  Ok 
24 GPS Industry standard 16 channel NMEA compliant GPS Support Yes
25 Environment health and safety RoHS certification (optional)  Ok 
26 EMC compliance FCC class A or equivalent (optional)  Ok 
27 Ingress Protection (IP) Compliance  Dust resistant, Water resistance (optional)
Ok 
Client Application Specification 
S.No Component Specification Compliance (Yes/No)
1 NFIQ Quality Software Inbuilt NFIQ quality software either at device level or extractor level to check the quality of fingerprint during enrolment  Yes
2 Enrolment client Enrolment client application shall have the following functionalities  Yes
· Enrolment of 10 fingerprints with identifier (Unique registration number) 
· Verification of NFIQ before accepting fingerprint for enrolment 
· De-duplication of fingerprint during enrolment for single candidate 
3 Authentication on client Authentication client application shall have following functionalities.  Yes
· Authentication of fingerprint based on 1: n logic among the local storage of fingerprint templates 
· Attendance transaction logs to be stored internally 
· Voice enablement of authentication output in English and Hindi 
4 Integration Biometric fingerprint enrollment and authentication client application should be integrated with office server application and should be able to upload / download through SSL / https connection dully suiting the API / web services provided by office Yes
5 Remote update of software Device must support version control feature in order to remotely monitor and provision application and system software, remote device management. Feature must be provisioned as a part of the device deployment Yes
6 Reports The following reports should be generated at the device level
1. Daily attendance report (batch wise and training center wise)
2. Batch wise attendance report
3. Student Wise attendance report
4. Trainers wise attendance report
5. Enrolment reports (displaying date of enrolment, number of fingerprint, etc)
6. Consolidated training centre attendance report
More reports may be added in the future.
Yes
7 Additional features • Device operation logs should be captured and stored internally. Device operations like, switch on & off, enrollment of finger print & user, change of settings, etc, shall be logged.
• Date and time in the biometric device should be either of the GPRS connection or server timings. No option to change the data and time should be available in the biometric device.
• Deletion of individual record (enrolment, attendance transaction logs, device operation logs should be disabled
Yes
8 Output file format Biometric data to be transferred to central server should be in XML format Yes